Видеорегистратор

IMG_3994
Для видеонаблюдения на работе заказал китайский видеорегистратор с DX. Вобщем то пост про интересную его особенность, может кто подаст интересную идею что сделать с ним такого инетресного.

Это удивительно, но мне с трудом удалось найти название модели и как бы производителя: DVR 7108V  Даже странно, насколько старательно отовсюду убраны упоминания производителя, 100% noname. Хотя казалось бы если завод выпускает качественный продукт то почему бы не зарабатывать себе имя и репутацию.

Подключаем видеорегистратор в сеть. Во внутренней сети заблокировано почти все, так что заставить его отправлять письма, ходить по фтп и т.п. мне не удалось, а VPN делать просто лень. Включаем в сеть и сканируем:

(в плане администрирования и ковыряния я профан, так что прошу не бить ногами, но закидывать ссылками на ликбезы)

spiritus@serkov-laptop:~$ nmap -v -PN -n -p1-65535 10.10.10.232
Starting Nmap 5.21 ( http://nmap.org ) at 2013-11-05 16:29 YEKT
 Initiating Connect Scan at 16:29
 Scanning 10.10.10.232 [65535 ports]
 Discovered open port 23/tcp on 10.10.10.232
 Discovered open port 554/tcp on 10.10.10.232
 Discovered open port 80/tcp on 10.10.10.232
 Discovered open port 9529/tcp on 10.10.10.232
 Discovered open port 34567/tcp on 10.10.10.232
 Discovered open port 34599/tcp on 10.10.10.232
 Discovered open port 9527/tcp on 10.10.10.232
 Completed Connect Scan at 16:29, 6.32s elapsed (65535 total ports)
 Nmap scan report for 10.10.10.232
 Host is up (0.0013s latency).
 Not shown: 65528 closed ports
 PORT      STATE SERVICE
 23/tcp    open  telnet
 80/tcp    open  http
 554/tcp   open  rtsp
 9527/tcp  open  unknown
 9529/tcp  open  unknown
 34567/tcp open  unknown
 34599/tcp open  unknown
Read data files from: /usr/share/nmap
 Nmap done: 1 IP address (1 host up) scanned in 6.63 seconds

Подключаемся telnet к порту 9527 и видим, что иногда просто так, а местами при нажатии на энтер сыпятся логи и отладочная информация:

spiritus@serkov-laptop:~$ telnet 10.10.10.232 9527
 Trying 10.10.10.232...
 Connected to 10.10.10.232.
 Escape character is '^]'.
connect errorconnect ip[202.70.4.150], port[15000] fail!
 ARSP: OpenNet failed!
 connect errorconnect ip[113.98.254.150], port[15000] fail!
 ARSP: OpenNet failed!
 connect errorconnect ip[202.70.4.150], port[15000] fail!
 ARSP: OpenNet failed!
 Transport: CServerIOThread stop ok
 Save SysTime to Flash:2013-11-05 17:54:34, Time:8288 Min, Trail:8288 Min
 Nat Server : 202.130.112.228 : 8000
 Nat Server : DeviceMac = [e97812f621573a22]
 Treansport: vv_nat_init successful UUID=[e97812f621573a22]
 Treansport: vv_nat_set_param successful
 Transport: CServerIOThread start OK
 connect errorconnect ip[113.98.254.150], port[15000] fail!
 ARSP: OpenNet failed!
 connect errorconnect ip[202.70.4.150], port[15000] fail!
 ARSP: OpenNet failed!
 connect errorconnect ip[113.98.254.150], port[15000] fail!
 ARSP: OpenNet failed!
 connect errorconnect ip[202.70.4.150], port[15000] fail!
 ARSP: OpenNet failed!
 connect errorconnect ip[113.98.254.150], port[15000] fail!
 ARSP: OpenNet failed!
 Save SysTime to Flash:2013-11-05 17:56:34, Time:8290 Min, Trail:8290 Min
 connect errorconnect ip[202.70.4.150], port[15000] fail!
 ARSP: OpenNet failed!
 connect errorconnect ip[113.98.254.150], port[15000] fail!
 ARSP: OpenNet failed!
 connect errorcurrent time: 2013-11-05 17:57:26
 connect ip[202.70.4.150], port[15000] fail!
 ARSP: OpenNet failed!
 Transport: CServerIOThread stop ok
 connect errorNat Server : 202.130.112.228 : 8000
 Nat Server : DeviceMac = [e97812f621573a22]
 Treansport: vv_nat_init successful UUID=[e97812f621573a22]
 Treansport: vv_nat_set_param successful
 Transport: CServerIOThread start OK
 connect ip[113.98.254.150], port[15000] fail!
 ARSP: OpenNet failed!
 login(, ******, Console, address:)
 user: account invalid
 User not valid!
 user name:DHCP: DhcpGetSecDNS DHCP_DNS_SERVER failed!
 DHCP: ulLease: 60, ulRenewTime: 0, ulReBindTime: 0
 DHCP: DhcpAddLease OK
 RTP: procOptions
 RTP: procOptions: RTSP/1.0 200 OK
 Server: H264DVR 1.0
 cseq: 142
 Public: OPTIONS, DESCRIBE, SETUP, TEARDOWN, GET_PARAMETER, PLAY, PAUSE
 RTP: procGetParameter
 RTP: procGetParameter: RTSP/1.0 200 OK
 Server: H264DVR 1.0
 cseq: 21
DHCP: DhcpGetSecDNS DHCP_DNS_SERVER failed!
 DHCP: ulLease: 60, ulRenewTime: 0, ulReBindTime: 0
 DHCP: DhcpAddLease OK
 RTP: procOptions
 RTP: procOptions: RTSP/1.0 200 OK
 Server: H264DVR 1.0
 cseq: 143
 Public: OPTIONS, DESCRIBE, SETUP, TEARDOWN, GET_PARAMETER, PLAY, PAUSE
DHCP: DhcpGetSecDNS DHCP_DNS_SERVER failed!
 DHCP: ulLease: 60, ulRenewTime: 0, ulReBindTime: 0
 DHCP: DhcpAddLease OK

После этого я в настройках отрубил у регистраторы все постороннее, он попросил перезагрузки:

spiritus@serkov-laptop:~$ telnet 10.10.10.232 9527
 Trying 10.10.10.232...
 Connected to 10.10.10.232.
 Escape character is '^]'.
SMTP        876   50  Normal
 ARSP        898   50  Normal
 RTSPSvr        894   50  Normal
 CNetStateReport        875   50  Normal
 TCP_Server        899   50  Normal
 CUpnpCli        897   50  Normal
 DHCPClient        891   50  Normal
 CAutoSearchDevice        892   50  Normal
 FTP        877   50  Normal
 Alarm        868   50  Normal
 Timers: ( 31710 Milli-Seconds Elapsed )
 _________________________________________
 ChnState       31730 Idel
 31740 Idel
 SaveTime       31910 Idel
 LockUser       31940 Idel
 Caret       32090 Idel
 EventManager       32620 Idel
 Encode       32650 Idel
 DetectTimer       32690 Idel
 33460 Idel
 WatchDog       33910 Idel
 BitrateStat       34420 Idel
 NetBitrateCal       34540 Idel
 AutoMaintain       38910 Idel
 StorageAlarm       39800 Idel
 InputIdle       40090 Idel
 LogSaveFile       48910 Idel
 55540 Idel
 Console      318910 Idel
 CConfigManager::setConfig(NetWork.Nat, )
 CConfigManager::setConfig(Guide, )
 tracepoint: Source/DHCP/DHCP.c,707
 Local Login(admin, ******)
 super password:jE8i58w3             //выделение мое. Этот пароль я не задавал, и я не смог найти к чему он подходит, это не пароль root
 login(admin, ******, GUI, address:)
 NetMask(GET):           255.255.255.0
 onVerifyNetDHCP() ../../Manager/VerifyConfig.cpp 835
 open file fail: /mnt/mtd/Config/dial-ip
 tracepoint: Source/DHCP/DHCP.c,707
 tracepoint: Source/DHCP/DHCP.c,707
 tracepoint: Source/DHCP/DHCP.c,707
 tracepoint: Source/DHCP/DHCP.c,707
 username:DHCP: send cmd: DHCP_DISCOVER
 DHCP: send cmd: DHCP_REQUEST
 DHCP: DhcpGetSecDNS DHCP_DNS_SERVER failed!
 DHCP: ulLease: 60, ulRenewTime: 0, ulReBindTime: 0

логинюсь с именем и паролем который я создал в GUI регистратора:

user name:serkov
 password:serkov
 login(serkov, ******, Console, address:)
 serkov$ help
 ----------------------Console Commands----------------------------
 232 Comm dump
 485Pro 485 Protocol!
 ability Net Ability Utility!
 ad AD debug interface!
 alarm Alarm status!
 autoshut auto shut the DVR
autotest AutoTest Command!
bitrate Dump BitRate infomation!
 cfg Config Help Utility!
 comm Comm Input String
 decoder decorder operation command!
 encode Encode commands!
 front front board utility!
fs Fs debug interface!
 heap Dump heap status!
 help Try help!
 localPlay local play console!
 log Log utility!
 netitf NetInterFace Dump!
 netm NetManager Dump!
 packet Packet usage!
 ptz ptz dump!
 quit Quit!
 reboot Reboot the system!
 record Record console utility!
 resource CPU usage!
 rtp RTP Dump!
 screen snapshot current screen!
shell Linux shell prompt!
 shutdown Shutdown the system!
 thread Dump application threads!
 time Set SystemTime!
 timer Dump application timers!
 upgrade Upgrade utility!
 user Account Information!
 ver version info!
 To see details, please use 'cmd -h'
serkov$

Некоторые команды вешают GUI намертво, только картинка идет, остальнео умирает. shell мне не получилось применить по назначению (и запускается через раз), в консоли нуб, понял только что это sh и все.
если подключиться во время загрузки то очень много можно увидеть:


spiritus@serkov-laptop:~$ telnet 10.10.10.250 9527
 Trying 10.10.10.250...
 Connected to 10.10.10.250.
 Escape character is '^]'.
 LIBDVR : FrontboardCreate Successful
 LIBDVR : Get xcauto Fialed ,xcauto = 0
 SystemGetBordType value: 0x1
 SERIES_TYPE = 3
 PRODUCTION_MODEL = 0x2f
 match success, return
 ================dump_hvrcap()================
 Analog-n1080PChn:  0
 Analog-n720PChn:   0
 Analog-n960HChn:   0
 Analog-nD1Chn:     1
 Analog-nHD1Chn:       0
 Analog-nCIFChn:       7
 Digital-n1080PChn: 0
 Digital-n720PChn:  0
 Digital-n960HChn:  0
 Digital-nD1Chn:    0
 Digital-nHD1Chn:   0
 Digital-nCIFChn:   0
 env_init: mtd0,start:58000000,size:80000,esize:10000 name:boot"
 **************************************************
 | LIBHICAP: Compiled at May 21 2013 09:22:17
 |TOTAL_VI_CHN_NUM            8
 |TOTAL_VENC_CHN_NUM            16
 |VENC_CHN_NUM_HOST_CHIP            16
 |TOTAL_AI_CHN_NUM            4
 |TOTAL_AENC_CHN_NUM            4
 |AENC_CHN_NUM_HOST_CHIP            8
 |HDEC_CHN_NUM                8
 |VDEC_CHN_NUM                8
 |HVR_PLAY_DECODE_NUM            8
 |HVR_DIGITAL_DECODE_NUM            0
 **************************************************
 **********************************************************************
 |                      SYSTEM INFO
 |     libdvr version:        2.4.3 - Complie time May 31 2013 14:25:43
 |       product type:        DVR_HI3000D-S
 |          slave_num:        0
 | mast video channel:        8
 | mast audio channel:        4
 |slave video channel:        0
 |slave audio channel:        0
 |         alarm mode:        Com in-4 out-1
 | forward video chip:        NVP1114
 |        master chip:        hi3511
 |    back video chip:        nvp1114
 |    store interface:        SATA
 |  network interface:        RJ45
 **********************************************************************
 SampleSysInit enter
Sofia: $Rev: 1053 $, Build in:Jun 20 2013, 16:50:47, 0
Infra: $Rev: 921 $, Build in:Dec 17 2012, 10:00:56
 CInfra::start()>>>>>>>>>>
 CTimerManager::CTimerManager()>>>>>>>>>
 CThreadManager::CThreadManager()>>>>>>>>>
 CConfigManager::start()...
 CVerifyConfig::Start()...
 CDefaultConfig::Start()...
 onVerifyNetIPFilter() ../../Manager/VerifyConfig.cpp 830
 onVerifyNetDHCP() ../../Manager/VerifyConfig.cpp 835
 onVerifyNetDDNS() ../../Manager/VerifyConfig.cpp 840
 onVerifyNetEmail() ../../Manager/VerifyConfig.cpp 845
 custom config NetWork.RemoteDevice verify failed with ret:20!
 GUITheme List:General
 ethMac:00:12:13:01:4d:29
 @CDevAbility::start()>>>>>>>>>>
 SystemGetExFunction 1307 :ncinfo.vendor =20HasIntelFunc: 0, HasCPCFunc: 0, HasNatFunc: 1, HasSpotFunc: 0, HasBaseFunc: 1, HasHVRFunc:1
 m_nVTotalChns: 8, m_nVCapChns: 8, m_nVPlayChns: 8, m_nDigDecChns: 0
 CFrontboard::CFrontboard()>>>>
 CFrontBoardParser::Init()>>>>>>>>>
 path = /usr/bin/Squirrel/pad
 path = /usr/bin/Squirrel/pad/DVR_17K4L.nut, name = DVR_17K4L
 path = /usr/bin/Squirrel/pad/GFDS_11K4L.nut, name = GFDS_11K4L
 path = /usr/bin/Squirrel/pad/General.nut, name = General
 path = /usr/bin/Squirrel/pad/TS8OB_7K4L.nut, name = TS8OB_7K4L
 sProtocolName: DVR_17K4L
 CFrontBoardParser::Init()>>>>>>>>>
 path = /usr/bin/Squirrel/remote
 path = /usr/bin/Squirrel/remote/AnJF.nut, name = AnJF
 path = /usr/bin/Squirrel/remote/DeJL.nut, name = DeJL
 path = /usr/bin/Squirrel/remote/DuoPWS.nut, name = DuoPWS
 path = /usr/bin/Squirrel/remote/General.nut, name = General
 path = /usr/bin/Squirrel/remote/GuoF.nut, name = GuoF
 path = /usr/bin/Squirrel/remote/GuoFDS.nut, name = GuoFDS
 path = /usr/bin/Squirrel/remote/HaiRSX.nut, name = HaiRSX
 path = /usr/bin/Squirrel/remote/KaiKD.nut, name = KaiKD
 path = /usr/bin/Squirrel/remote/MeiF.nut, name = MeiF
 path = /usr/bin/Squirrel/remote/R8CA.nut, name = R8CA
 path = /usr/bin/Squirrel/remote/SiL.nut, name = SiL
 path = /usr/bin/Squirrel/remote/TaiA.nut, name = TaiA
 path = /usr/bin/Squirrel/remote/XinDGC.nut, name = XinDGC
 sProtocolName: General
 CConfigManager::setConfig(Ability.DeviceDesc, )
Manager: $Rev: 1008 $, Build in:Jun 20 2013, 16:50:39
 CManager::start()>>>>>>>>>>
 CConsole::start()...
 CMagicBox::start()...
 Log Manager starting....!
 =======Shut Down at 2013-11-5 18:44:51 with m_exitState[1], SerialNo:
 CAutoMaintain::Start()...
 CDaylight::start()...
 LIBDVR : create hotplug monitor thread!LIBDVR : ------ ide library : version 2.00, built at Jun  5 2013, 13:19:56 -----
 LIBDVR : FILE -> misc/scanbus.c, LINE -> 744: opendir /proc/scsi/usb-storage/
Launched at Local Time 2013/11/5 18:46:31!
 CUserManager::start......
 onVerifyNetIPFilter() ../../Manager/VerifyConfig.cpp 830
 login(default, ******, GUI, address:)
 CPacketManagerImp::CPacketManagerImp()>>>>>>>>>
 sm_packetBuf null use self heap memory!
 Adjust Page!
 Packet usage : 0K / 10239K, 0%
----------------------[11-05 18:46:31]
 ======= pre record buf 2048
 =====================================
 | LIBFVIDEO: Compiled at Jun 19 2013 16:52:22
 =====================================
 >>>>>>>>>VI_CHN_NUM_HOST_CHIP=8
 CPU_IS_3520D ResetSampleChip!!!!!!
 fvideo_register:Register operation to 1918
 VideoSetVstd vstd:1
 ~~~~~~~~~~~~~~~~NEXTCHIP FVIDEO TYPE: NVP1918/4_R0
 nvp1918_720h Video Decoder NTSC Mode
 CMOS ExitTime:2013-11-05 18:44:51
 CurrentTime:2013-11-05 18:46:32
 Save SysTime to Flash:2013-11-05 18:46:32, Time:8344 Min, Trail:8344 Min
 reversion2_fix s_videomod:1
 NVP1918 Clock 144M Mode
 ~~~~~~~~~~~~~~~~nvp1918 S/W reset~~~~~~~~~~~~~~~~
 init_nvp1918_720h_init_ntsc  chip = 0x60
 VideoOut SetInit Resolution:1024x768
 May 21 2013 09:22:18 ==>Comm_VoPubConfig(396): HI_MPI_VO_SetDevCSC failed with 0xa00f8008!
GDI: $Rev: 923 $, Build in:Dec  7 2012, 14:04:54
 CGDI::start()>>>>>>>>
@=================================
 @mem = 0x45e7f000 0x45e7f000 0x00000000
 @pitch = 2048
 @width = 1024
 @height = 768
 @foramt = 0
 @===================================
 CLocales::CLocales()>>>>>>>>>
 CFontManager::CFontManager()>>>>>>>>>
 SuportLang:Arabic
 SuportLang:Brazilian
 SuportLang:Bulgarian
 SuportLang:Czech
 SuportLang:Dutch
 SuportLang:English
 SuportLang:Farsi
 SuportLang:Finnish
 SuportLang:French
 SuportLang:German
 SuportLang:Greek
 SuportLang:Hebrew
 SuportLang:Hungarian
 SuportLang:Indonesian
 SuportLang:Italian
 SuportLang:Japanese
 SuportLang:Poland
 SuportLang:Portugal
 SuportLang:Romanian
 SuportLang:Russian
 SuportLang:SimpChinese
 SuportLang:Slovakia
 SuportLang:Spanish
 SuportLang:Swedish
 SuportLang:Thai
 SuportLang:TradChinese
 SuportLang:Turkey
 SuportLang:Vietnamese
 CConfigManager::getConfig 'General', but default config is not set yet!
 GUI Use Theme:default
 PageRecord
 PageConfigRecord
 PageConfigSnapshot
 PagePlay
 PageBackup
 PageAlarm
 PageConfigMotionDetect
 PageConfigBlindDetect
 PageConfigLossDetect
 PageConfigAlarm
 PageAlarmOut
 PageConfigAbnormal
 PageConfigVideoAnalyze
 PageConfig
 PageConfigGeneral
 PageConfigEncode
 PageConfigNetCommon
 PageConfigNetService
 PageConfigDisplay
 PageConfigPtz
 PageConfigComm
 PageConfigTour
 PageConfigSpot
 PageConfigDigiCh
 PageDigitalConfig
 PageDigitStatus
 PageDigitalInfo
 PageTool
 PageHddManager
 PageUserManager
 PageInfoOnlineUser
 PageTVAdjust
 PageAutoMaintain
 PageConfigDefault
 PageUpgrade
 PageDeviceDesc
 PageConfigPos
 PageImExport
 PageConfigNormalGPSTiming
 PageInfo
 PageInfoHdd
 PageInfoBps
 PageInfoLog
 PageInfoVersion
 PageCarFunction
 PageConfigCarStatus
 PageConfigDelay
 PageConfigGPSTiming
 PageConfigCarDisplay
 PageExit
 Logo Path:/mnt/logo/h264dvr.gif
 CBackupManager::CBackupManager()>>>>>>>>>>>>>>>>
 CDriverManager::CDriverManager()>>>>>>>>>
Storage: $Rev: 922 $, $Author: liwj $, Build in:Jun 15 2013, 14:06:31
 CStorage::start()>>>>>>>>>>
 CDriverManager::Start()>>>>>>>>>
 scsin: 0
 info[0].scsin: 0
 Unknown type:Direct-Access
 scsi_info[0].scsin : 0
 scsin:0
 type:0
 sdx:0
 blocks:976762584
 name:/dev/sda
xxxxxxxxxxxxxxxxxxxxxxxxxxxxx:/dev/sda
 wfs_file_sys_init() libWFS.a $Rev: 9 $, Build in:Jun 15 2013 08:48:18
 disk_num = 1
 ide_num:1
 ide_port:2
 ide_mask:0x1
 ide_bad:0x0
 cap: 1953525168, 931(G)
 get frame in other frame oh bad MP4Code is 1fd expectNextHead is 882e16a
 get frame in other frame oh bad MP4Code is 1fd expectNextHead is 822e56a
 get frame in other frame oh bad MP4Code is 1fd expectNextHead is 8c2e56b
 get frame in other frame oh bad MP4Code is 1fd expectNextHead is 862e16d
 frame error expectNextHead is b6
 get frame in other frame oh bad MP4Code is 1fd expectNextHead is 2722e46b
 frame error expectNextHead is 554
 frame error expectNextHead is 441
 wfs_file_sys_init() end============================
driver basic parameter:
 ----------------------------------------------------------------------------------------------------
 LIBDVR : /dev/sda Standby, Yimer = 10Min
 LIBDVR : /dev/sda Wakeup
 | dev.part |type|total_clus | temp_off | index_off | dir_off | data_off | rev_clus | sec/clus |status|
 |----------|----|-----------|----------|-----------|---------|----------|----------|----------|------|
 |0.0 -> 0.0|   0|     476919|        24|      61696|      187|     62720|        64|      4096|0x0000|
 ------------------------------------------------------------------------------------------------
 driver operation parameter:
 -------------------------------------------------------------------------------------------------------------------------
 | dev.part | F| S|  curr  |        start1         |         end1          |        start2         |        end2           |
 |          |  |  |        |MM-DD HH:MM:SS|  clus  |MM-DD HH:MM:SS|  clus  |MM-DD HH:MM:SS|  clus  |MM-DD HH:MM:SS|  clus  |
 |----------|--|--|--------|--------------|--------|--------------|--------|--------------|--------|--------------|--------|
 *0.0 -> 0.0| 0| O|   46692|10-10 02:30:01|      64|11-05 18:45:44|   46692|00-00 00:00:00|       0|00-00 00:00:00|       0|
 --------------------------------------------------------------------------------------------------------------------------
 driver time chart:
 --------------------------------------------------------------------------
 |dev.part | period of time                                                 |
 |---------|----------------------------------------------------------------|
 |   0. 0  |_                                                               |
 ------------------------------------------------------------------------
 driver time sections:
 ------------------------------------------------------------------------
 |dev part |start_clus| end_clus |    start_time     |   end_time        |
 |---------|----------|----------|-------------------|-------------------|
 |   0. 0  |       64 |       71 | 13-10-10 02:30:01 | 13-10-10 02:32:31 |
 |   0. 0  |       72 |    46692 | 13-10-10 00:24:49 | 13-11-05 18:45:44 |
 |   0. 0  |        0 |        0 | 00-00-00 00:00:00 | 00-00-00 00:00:00 |
 ------------------------------------------------------------------------
CMedia::start() $Rev: 972

gt;>>>> VoGetColor vodev:0,lum:50,con:58,hue:50,sat:60 VoGetColor vodev:2,lum:50,con:50,hue:50,sat:50 onVerifyAudioInFormat() ../../Manager/VerifyConfig.cpp 1202 onVerifyTour() ../../Manager/VerifyConfig.cpp 1116 1  8 CCaptureBuffer::CCaptureBuffer size = 2048 KB sched set 98, 2 1  8 CPlayer::start()...... CPacketBuffer::CPacketBuffer size = 2047 KB CConfigManager::getConfig 'Media', but default config is not set yet! CLocalPlayer::onConfigEncode maxDecodePower:0 CLocalPlayer::start()........ CLocalPlayer::start().....OK... onVerifyTour() ../../Manager/VerifyConfig.cpp 1116 ===>>> VideoSetTVMargin (0, 0, 0, 0) channel:0 hdly =155 vdly =60 hbnd=0 vbnd =232 channel:1 hdly =155 vdly =60 hbnd=0 vbnd =232 channel:2 hdly =155 vdly =60 hbnd=0 vbnd =232 channel:3 hdly =155 vdly =60 hbnd=0 vbnd =232 channel:4 hdly =155 vdly =60 hbnd=0 vbnd =232 channel:5 hdly =155 vdly =60 hbnd=0 vbnd =232 channel:6 hdly =155 vdly =60 hbnd=0 vbnd =232 channel:7 hdly =155 vdly =60 hbnd=0 vbnd =232 CSplitManager::start()...... CConfigManager::setConfig(General.SystemState, ) NVP1918 video set color is bri 16, con 123 hue 1 sat 149  u_gain 0x0  v_gain 0x0 sharp 0x808 cpu:1 NVP1918 video set color is bri 16, con 123 hue 1 sat 149  u_gain 0x0  v_gain 0x0 sharp 0x808 cpu:1 NVP1918 video set color is bri 16, con 123 hue 1 sat 149  u_gain 0x0  v_gain 0x0 sharp 0x808 cpu:1 NVP1918 video set color is bri 16, con 123 hue 1 sat 149  u_gain 0x0  v_gain 0x0 sharp 0x808 cpu:1 NVP1918 video set color is bri 16, con 123 hue 1 sat 149  u_gain 0x0  v_gain 0x0 sharp 0x808 cpu:1 NVP1918 video set color is bri 16, con 123 hue 1 sat 149  u_gain 0x0  v_gain 0x0 sharp 0x808 cpu:1 NVP1918 video set color is bri 16, con 123 hue 1 sat 149  u_gain 0x0  v_gain 0x0 sharp 0x808 cpu:1 NVP1918 video set color is bri 16, con 123 hue 1 sat 149  u_gain 0x0  v_gain 0x0 sharp 0x808 cpu:1 CRecordManager::start()>>>>>>>>> tracepoint: ../../Media/CaptureBuffer.cpp,189 tracepoint: ../../Media/CaptureBuffer.cppLIBDVR : CommOpen Successful LIBDVR : unsupported stop bits 1 LIBDVR : Create Ptz Dev Successful LIBDVR : Open Ptz Dev Successful LIBDVR : Ptz Dev Has Already Open LIBDVR : /dev/sda Wakeup open /mnt/custom/data/Pics/General//Navagation/Record3.jpg failed open /mnt/custom/data/Pics/General//Navagation/Record4.jpg failed open /mnt/custom/data/Pics/General//Navagation/Search3.jpg failed open /mnt/custom/data/Pics/General//Navagation/Search4.jpg failed open /mnt/custom/data/Pics/General//Navagation/RecordConfig3.jpg failed open /mnt/custom/data/Pics/General//Navagation/RecordConfig4.jpg failed open /mnt/custom/data/Pics/General//Navagation/RecordMode0.jpg failed open /mnt/custom/data/Pics/General//Navagation/RecordMode1.jpg failed open /mnt/custom/data/Pics/General//Navagation/RecordMode2.jpg failed open /mnt/custom/data/Pics/General//Navagation/RecordMode3.jpg failed open /mnt/custom/data/Pics/General//Navagation/RecordMode4.jpg failed ,189 tracepoint: ../../Media/CaptureBuffer.cpp,189 tracepoint: ../../Media/CaptureBuffer.cpp,189 tracepoint: ../../Media/CaptureBuffer.cpp,189 tracepoint: ../../Media/CaptureBuffer.cpp,189 tracepoint: ../../Media/CaptureBuffer.cpp,189 tracepoint: ../../Media/CaptureBuffer.cpp,189 ethMac:00:12:13:01:4d:29 CFrontBoardProtocol::start()...... KeyMap OK ............. sPadName :DVR_17K4L name: DVR_17K4L sRemoteName :General name: General onVerifyComm() ../../Manager/VerifyConfig.cpp 1100 CNutParser::Init()>>>>>>>>> path = /usr/bin/Squirrel/rs485 path = /usr/bin/Squirrel/rs485/DaHua.nut, name = DaHua path = /usr/bin/Squirrel/rs485/DaHua2.nut, name = DaHua2 path = /usr/bin/Squirrel/rs485/GPS.nut, name = GPS path = /usr/bin/Squirrel/rs485/General.nut, name = General path = /usr/bin/Squirrel/rs485/HB5003.nut, name = HB5003 path = /usr/bin/Squirrel/rs485/HanBang.nut, name = HanBang path = /usr/bin/Squirrel/rs485/Hikvision.nut, name = Hikvision path = /usr/bin/Squirrel/rs485/InteractCmd.nut, name = InteractCmd path = /usr/bin/Squirrel/rs485/LongYang-D900.nut, name = LongYang-D900 path = /usr/bin/Squirrel/rs485/LongYang.nut, name = LongYang path = /usr/bin/Squirrel/rs485/MeiFang.nut, name = MeiFang path = /usr/bin/Squirrel/rs485/MinYang.nut, name = MinYang path = /usr/bin/Squirrel/rs485/MinYang3.nut, name = MinYang3 path = /usr/bin/Squirrel/rs485/Ranging.nut, name = Ranging path = /usr/bin/Squirrel/rs485/SISO.nut, name = SISO path = /usr/bin/Squirrel/rs485/Transparent.nut, name = Transparent path = /usr/bin/Squirrel/rs485/Universal-CS8x.nut, name = Universal-CS8x path = /usr/bin/Squirrel/rs485/Vista.nut, name = Vista CComm::start()>>>>>>>>> The thread create.......... onVerifyComm() ../../Manager/VerifyConfig.cpp 1100 CPtz::CPtz()>>>>>>>>> onVerifyPTZ() ../../Manager/VerifyConfig.cpp 1105 CConfigManager::getConfig 'Uart', but default config is not set yet! onVerifyPTZTour() Source/Ptz.cpp 1152 onVerifyPTZ() ../../Manager/VerifyConfig.cpp 1105 CPtz::Init()>>>>>>>>> CRS485::CRS485()>>>>>>>>> CNutParser::Init()>>>>>>>>> path = /usr/bin/Squirrel/rs485 path = /usr/bin/Squirrel/rs485/DaHua.nut, name = DaHua path = /usr/bin/Squirrel/rs485/DaHua2.nut, name = DaHua2 path = /usr/bin/Squirrel/rs485/GPS.nut, name = GPS path = /usr/bin/Squirrel/rs485/General.nut, name = General path = /usr/bin/Squirrel/rs485/HB5003.nut, name = HB5003 path = /usr/bin/Squirrel/rs485/HanBang.nut, name = HanBang path = /usr/bin/Squirrel/rs485/Hikvision.nut, name = Hikvision path = /usr/bin/Squirrel/rs485/InteractCmd.nut, name = InteractCmd path = /usr/bin/Squirrel/rs485/LongYang-D900.nut, name = LongYang-D900 path = /usr/bin/Squirrel/rs485/LongYang.nut, name = LongYang path = /usr/bin/Squirrel/rs485/MeiFang.nut, name = MeiFang path = /usr/bin/Squirrel/rs485/MinYang.nut, name = MinYang path = /usr/bin/Squirrel/rs485/MinYang3.nut, name = MinYang3 path = /usr/bin/Squirrel/rs485/Ranging.nut, name = Ranging path = /usr/bin/Squirrel/rs485/SISO.nut, name = SISO path = /usr/bin/Squirrel/rs485/Transparent.nut, name = Transparent path = /usr/bin/Squirrel/rs485/Universal-CS8x.nut, name = Universal-CS8x path = /usr/bin/Squirrel/rs485/Vista.nut, name = Vista CNutParser::Init()>>>>>>>>> path = /usr/bin/Squirrel/netkeyboard CRS485Protocol start... onVerifyPTZAlarmProtocol() ../../Manager/VerifyConfig.cpp 751 CAlarmManager::instance()->start()... CAlarm::CAlarm()>>>>>>>>> CAlarm::Start()>>>>>>>>> pParam->iLevel:3,nvp1918_motion_sens_tbl[pParam->iLevel-1]:50 pParam->iLevel:3,nvp1918_motion_sens_tbl[pParam->iLevel-1]:50 pParam->iLevel:3,nvp1918_motion_sens_tbl[pParam->iLevel-1]:50 pParam->iLevel:3,nvp1918_motion_sens_tbl[pParam->iLevel-1]:50 pParam->iLevel:3,nvp1918_motion_sens_tbl[pParam->iLevel-1]:50 pParam->iLevel:3,nvp1918_motion_sens_tbl[pParam->iLevel-1]:50 pParam->iLevel:3,nvp1918_motion_sens_tbl[pParam->iLevel-1]:50 pParam->iLevel:3,nvp1918_motion_sens_tbl[pParam->iLevel-1]:50 CGUI::Start()>>>>>>>>> CConfigManager::setConfig(fVideo.GUISet, ) @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&Tip this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&Tipopen /mnt/custom/data/Pics/General//Navagation/Backup3.jpg failed open /mnt/custom/data/Pics/General//Navagation/Backup4.jpg failed open /mnt/custom/data/Pics/General//Navagation/Alarm3.jpg failed open /mnt/custom/data/Pics/General//Navagation/Alarm4.jpg failed open /mnt/custom/data/Pics/General//Navagation/MotionDetect3.jpg failed open /mnt/custom/data/Pics/General//Navagation/MotionDetect4.jpg failed open /mnt/custom/data/Pics/General//Navagation/BlindDetect3.jpg failed open /mnt/custom/data/Pics/General//Navagation/BlindDetect4.jpg failed open /mnt/custom/data/Pics/General//Navagation/VideoLoss3.jpg failed open /mnt/custom/data/Pics/General//Navagation/VideoLoss4.jpg failed open /mnt/custom/data/Pics/General//Navagation/NetAlarm3.jpg failed open /mnt/custom/data/Pics/General//Navagation/NetAlarm4.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmIn3.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmIn4.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmOut3.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmOut4.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmAbnormal3.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmAbnormal4.jpg failed open /mnt/custom/data/Pics/General//Navagation/SystemInfo3.jpg failed open /mnt/custom/data/Pics/General//Navagation/SystemInfo4.jpg failed open /mnt/custom/data/Pics/General//Navagation/HDDInfo3.jpg failed open /mnt/custom/data/Pics/General//Navagation/HDDInfo4.jpg failed open /mnt/custom/data/Pics/General//Navagation/BPSInfo3.jpg failed open /mnt/custom/data/Pics/General//Navagation/BPSInfo4.jpg failed open /mnt/custom/data/Pics/General//Navagation/LogInfo3.jpg failed open /mnt/custom/data/Pics/General//Navagation/LogInfo4.jpg failed open /mnt/custom/data/Pics/General//Navagation/Version3.jpg failed open /mnt/custom/data/Pics/General//Navagation/Version4.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmStatus0.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmStatus1.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmStatus2.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmStatus3.jpg failed open /mnt/custom/data/Pics/General//Navagation/AlarmStatus4.jpg failed open /mnt/custom/data/Pics/General//Navagation/OnlineUser3.jpg failed open /mnt/custom/data/Pics/General//Navagation/OnlineUser4.jpg failed open /mnt/custom/data/Pics/General//Navagation/Config3.jpg failed open /mnt/custom/data/Pics/General//Navagation/Config4.jpg failed open /mnt/custom/data/Pics/General//Navagation/GeneralConfig3.jpg failed open /mnt/custom/data/Pics/General//Navagation/GeneralConfig4.jpg failed open /mnt/custom/data/Pics/General//Navagation/EncodeConfig3.jpg failed open /mnt/custom/data/Pics/General//Navagation/EncodeConfig4.jpg failed open /mnt/custom/data/Pics/General//Navagation/CommConfig3.jpg failed open /mnt/custom/data/Pics/General//Navagation/CommConfig4.jpg failed open /mnt/custom/data/Pics/General//Navagation/NetService3.jpg failed open /mnt/custom/data/Pics/General//Navagation/NetService4.jpg failed open /mnt/custom/data/Pics/General//Navagation/NetCommon3.jpg failed open /mnt/custom/data/Pics/General//Navagation/NetCommon4.jpg failed open /mnt/custom/data/Pics/General//Navagation/PtzConfig3.jpg failed open /mnt/custom/data/Pics/General//Navagation/PtzConfig4.jpg failed open /mnt/custom/data/Pics/General//Navagation/TourConfig3.jpg failed open /mnt/custom/data/Pics/General//Navagation/TourConfig4.jpg failed open /mnt/custom/data/Pics/General//Navagation/DisplayConfig3.jpg failed open /mnt/custom/data/Pics/General//Navagation/DisplayConfig4.jpg failed open /mnt/custom/data/Pics/General//Navagation/DefaultConfig3.jpg failed open /mnt/custom/data/Pics/General//Navagation/DefaultConfig4.jpg failed open /mnt/custom/data/Pics/General//Navagation/SystemConfig3.jpg failed open /mnt/custom/data/Pics/General//Navagation/SystemConfig4.jpg failed open /mnt/custom/data/Pics/General//Navagation/HDDManager3.jpg failed open /mnt/custom/data/Pics/General//Navagation/HDDManager4.jpg failed open /mnt/custom/data/Pics/General//Navagation/UserManager3.jpg failed open /mnt/custom/data/Pics/General//Navagation/UserManager4.jpg failed open /mnt/custom/data/Pics/General//Navagation/AutoMaintain3.jpg failed open /mnt/custom/data/Pics/General//Navagation/AutoMaintain4.jpg failed open /mnt/custom/data/Pics/General//Navagation/TVAdjust3.jpg failed open /mnt/custom/data/Pics/General//Navagation/TVAdjust4.jpg failed open /mnt/custom/data/Pics/General//Navagation/Exit3.jpg failed open /mnt/custom/data/Pics/General//Navagation/Exit4.jpg failed open /mnt/custom/data/Pics/General//Navagation/Upgrade3.jpg failed open /mnt/custom/data/Pics/General//Navagation/Upgrade4.jpg failed open /mnt/custom/data/Pics/General//Navagation/DeviceDesc3.jpg failed open /mnt/custom/data/Pics/General//Navagation/DeviceDesc4.jpg failed open /mnt/custom/data/Pics/General//Navagation/StroagePosition0.jpg failed open /mnt/custom/data/Pics/General//Navagation/StroagePosition1.jpg failed open /mnt/custom/data/Pics/General//Navagation/StroagePosition2.jpg failed open /mnt/custom/data/Pics/General//Navagation/StroagePosition3.jpg failed open /mnt/custom/data/Pics/General//Navagation/StroagePosition4.jpg failed open /mnt/custom/data/Pics/General//Navagation/PageDeviceProduct0.jpg failed open /mnt/custom/data/Pics/General//Navagation/PageDeviceProduct1.jpg failed open /mnt/custom/data/Pics/General//Navagation/PageDeviceProduct2.jpg failed open /mnt/custom/data/Pics/General//Navagation/PageDeviceProduct3.jpg failed open /mnt/custom/data/Pics/General//Navagation/PageDeviceProduct4.jpg failed open /mnt/custom/data/Pics/General//Navagation/ImExport3.jpg failed open /mnt/custom/data/Pics/General//Navagation/ImExport4.jpg failed DHCPPROTO: eth name(eth1) not valid DHCPPROTO: eth name(eth2) not valid DHCPPROTO: eth name(eth3) not valid RTP: CRtspSvrApp start ok DHCP: send cmd: DHCP_DISCOVER this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&ConfigAlarm.PtzLinkage this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&RecordStorage.ScheduleSet this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:Set this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&ConfigAlarm.PtzLinkage this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&RecordStorage.ScheduleSet this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:Set this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&ConfigAlarm.PtzLinkage this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&RecordStorage.ScheduleSet this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:Set this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&ConfigAlarm.PtzLinkage this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&RecordStorage.ScheduleSet this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:Set this page may cause memory fault! Not Found string 'Language.Norsk' !!! Not Found string 'Language.Dansk' !!! Not Found string 'CommProtocol.GPS' !!! Not Found string 'CommProtocol.General' !!! Not Found string 'CommProtocol.InteractCmd' !!! Not Found string 'CommProtocol.Ranging' !!! Not Found string 'CommProtocol.Transparent' !!! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&Title.SystemUpgrade this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&Tip this page may cause memory fault! @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@Error psz:&Title.PtzConfig this page may cause memory fault! NetMask(GET):           255.255.255.0
NetIP: $Rev: 1055 $, $Author: chencb $, Build in:Jun 20 2013, 16:50:19
 CNetService::start()>>>>>>>>>>
 NetMask(GET):           255.255.255.0
 onVerifyNetEmail() ../../Manager/VerifyConfig.cpp 845
 onVerifyNetDDNS() ../../Manager/VerifyConfig.cpp 840
 Value::asCString:null
 failed!
 DHCPD: start ...
 NETSTATED: start ...
 SMTPD: >>>>>>>>>>>>>Start
 DDNS: Start ....
 NTPD: Start OK...
 AUTOSEARCH: start ...
 AlarmCenter: Start ....
 CRtpApp start ok
 ver ---- V4.02.R11.04700082, [047 00 082]
 ****************************************************************************httpd  1.00 Mar 28 2013, Status: NOK
 ***** http port = 80, tcp port = 34567, udp port = 34568, language = 0, file name: /mnt/web
 ****************************************************************************szUrl: http://cctvsv.com:80/ocx/Active.exe
 UPNP: start ...
 ARSP: Start ....
NetIP: $Rev: 1055 $, $Author: chencb $, Build in:Jun 20 2013, 16:49:46
 CNetIP::start()>>>>>>>>>>
 NetMask(GET):           255.255.255.0
 Transport: CServerIOThread start OK
 cfgNetCommon.TCPPort=[34567]
 Transport: CServerIOThread start OK
 cfgNetCommon.UDPPort=[34568]
 s_DeviceMac=[e97812f621573a22]
 -----------OnEncode----------->
 <-----------OnEncode-----------
 CNetManager start ok
 m_iPushFd: 182, m_iPopFd: 187
 alm_type:1,tmp:0,hwversion:0
 alm_type:1,tmp:0,hwversion:0
 Threads:
 Name            PID  Prior State
 _______________________________________________________
 Main        831   64  Normal
 TimerManager        832   50  Normal
 Pooled        833   50  Normal
 Console        837   50  Normal
 DevFrontboard        869   50  Normal
 Pooled        838   50  Normal
 Pooled        839   50  Normal
 Pooled        840   50  Normal
 DevMouse        841   50  Normal
 DriverManager        845   50  Normal
 Backup        843   50  Normal
 GUI        876   50  Normal
 Comm        870   50  Normal
 CaptureManager        846   98  Normal
 RecordManager        865   50  Normal
 DevPtz        872   50  Normal

Еще эта зараза спустя пару минут после загрузки меняет IP

spiritus@serkov-laptop:~$ telnet 10.10.10.242 9527
 Trying 10.10.10.242...
 Connected to 10.10.10.242.
 Escape character is '^]'.
TPTCPServer CloseClient: 0
 .
 saveFile:/mnt/mtd/Config/Json/General
 url is rtsp://10.10.10.242:554/user=admin&password=&channel=1&stream=0.sdp?real_stream--rtp-caching=100
 strIP: 10.10.10.242:554
 strIP: 10.10.10.242, strPort: 554, nChannel: 0, nStream: 0
 profile_level_id: 64001e, sprop_parameter_sets: Z2QAHq2EAQwgCGEAQwgCGEAQwgCEK1BYHsg=,aO48sA==, strSPS: Z2QAHq2EAQwgCGEAQwgCGEAQwgCEK1BYHsg=, strPPS: aO48sA==
 url is rtsp://10.10.10.242:554/user=admin&password=&channel=1&stream=0.sdp/trackID=3
 RTP/AVP;unicast;mode=PLAY;source=10.10.10.242;client_port=6970-6971;server_port=40000-40001;ssrc=00001BCC
 url is rtsp://10.10.10.242:554/user=admin&password=&channel=1&stream=0.sdp?real_stream--rtp-caching=100
 strIP: 10.10.10.242:554
 strIP: 10.10.10.242, strPort: 554, nChannel: 0, nStream: 0
 session is 561730
 url is rtsp://10.10.10.242:554/user=admin&password=&channel=1&stream=0.sdp?real_stream--rtp-caching=100
 TPTCPServer CloseClient: 0
 CConfigManager::setConfig(General.SystemState, )
 .
 CConfigManager::setConfig(General.SystemState, )
 CConfigManager::setConfig(General.SystemState, )
 url is rtsp://10.10.10.242:554/user=admin&password=&channel=2&stream=0.sdp?real_stream--rtp-caching=100
 strIP: 10.10.10.242:554
 strIP: 10.10.10.242, strPort: 554, nChannel: 1, nStream: 0
 profile_level_id: 640014, sprop_parameter_sets: Z2QAFK2EAQwgCGEAQwgCGEAQwgCEK1Cw/IA=,aO48sA==, strSPS: Z2QAFK2EAQwgCGEAQwgCGEAQwgCEK1Cw/IA=, strPPS: aO48sA==
 url is rtsp://10.10.10.242:554/user=admin&password=&channel=2&stream=0.sdp/trackID=3
 RTP/AVP;unicast;mode=PLAY;source=10.10.10.242;client_port=6970-6971;server_port=40000-40001;ssrc=00001BCC
 url is rtsp://10.10.10.242:554/user=admin&password=&channel=2&stream=0.sdp?real_stream--rtp-caching=100
 strIP: 10.10.10.242:554
 strIP: 10.10.10.242, strPort: 554, nChannel: 1, nStream: 0
 session is 565260
 CConfigManager::setConfig(General.SystemState, )
 CConfigManager::setConfig(General.SystemState, )
 CConfigManager::setConfig(General.SystemState, )
 CConfigManager::setConfig(General.SystemState, )
 CConfigManager::setConfig(General.SystemState, )
 CConfigManager::setConfig(General.SystemState, )
 aa 1a 84 1
 aa 1a 84 01
 saveFile:/mnt/mtd/Config/Json/General
 aa 1a 84 0
 aa 1a 84 00
 CConfigManager::setConfig(General.SystemState, )
 --- KEY_SPLIT XM_KEYUP ---
 saveFile:/mnt/mtd/Config/Json/General
 Save SysTime to Flash:2013-11-05 18:56:32, Time:8354 Min, Trail:8354 Min
 current time: 2013-11-05 18:56:44
 Save SysTime to Flash:2013-11-05 18:58:32, Time:8356 Min, Trail:8356 Min
 CConfigManager::setConfig(General.SystemState, )
 saveFile:/mnt/mtd/Config/Json/General
 Save SysTime to Flash:2013-11-05 19:00:32, Time:8358 Min, Trail:8358 Min
 current time: 2013-11-05 19:01:44
 Save SysTime to Flash:2013-11-05 19:02:32, Time:8360 Min, Trail:8360 Min
 Save SysTime to Flash:2013-11-05 19:04:32, Time:8362 Min, Trail:8362 Min
 Save SysTime to Flash:2013-11-05 19:06:32, Time:8364 Min, Trail:8364 Min
 current time: 2013-11-05 19:06:45
 Save SysTime to Flash:2013-11-05 19:08:32, Time:8366 Min, Trail:8366 Min
 NetMask(GET):           255.255.255.0
 open file fail: /mnt/mtd/Config/dial-ip
 username:RTP: procOptions
 RTP: procOptions: RTSP/1.0 200 OK
 Server: H264DVR 1.0
 cseq: 23
 Public: OPTIONS, DESCRIBE, SETUP, TEARDOWN, GET_PARAMETER, PLAY, PAUSE
DHCP: DhcpGetSecDNS DHCP_DNS_SERVER failed!
 DHCP: ulLease: 60, ulRenewTime: 0, ulReBindTime: 0
 DHCP: DhcpAddLease OK

Ковыряния в залогиненом состоянии:

serkov$ rtp
 RtpSessionListMap: 0, Msg: 0
 Time interval: 2500, RTSPSessionList: 0
 RTSPSessionPortList: 0
 serkov$ cfg
 cfg -d [name] [index] display the config of name!
 cfg -a        display all config name!
 cfg -p        dispaly config file path!
 cfg -m        dispaly map status!
 cfg -c [path] convert config file to styled file!
 cfg -s [path] style dump config file!
 cfg -n [name] [path] style dump config file!
 cfg -g [config] [dir] save the differences betwen current configs and default configs.
 config is the config name,like fVideo, * means all config;
 dir is the directory where to save the result
 serkov$ DHCP: DhcpGetSecDNS DHCP_DNS_SERVER failed!
 DHCP: ulLease: 60, ulRenewTime: 0, ulReBindTime: 0
 DHCP: DhcpAddLease OK
 cfg -m
--------------------------------Apply Map members------------------------------
 AVEnc.Encode  AVEnc.VideoColor AVEnc.VideoWidget   AVEnc.WaterMark
 Ability.DeviceDescAbility.EncodePower  Ability.SerialNoAbility.SupportVstd
 Alarm.LocalAlarm    Alarm.NetAbort    Alarm.NetAlarmAlarm.NetIPConflict
 Detect.BlindDetect Detect.LossDetectDetect.MotionDetectGeneral.AutoMaintain
 General.General  General.LocationGeneral.SupportLangGeneral.SystemState
 Media.DecodeParamNetWork.AlarmServerNetWork.LocalSdkPlatform       NetWork.Nat
 NetWork.Net3G   NetWork.NetARSP NetWork.NetCommon   NetWork.NetDDNS
 NetWork.NetDNS  NetWork.NetEmail    NetWork.NetFTPNetWork.NetIPFilter
 NetWork.NetKeyboard NetWork.NetMobile    NetWork.NetNTP       NetWork.Pos
 NetWork.Upnp      NetWork.Wifi            RecordStorage.StorageFailure
 Storage.StorageLowSpaceStorage.StorageNotExistStorage.StoragePosition         Uart.Comm
 Uart.PTZ        Uart.RS485      VideoChannel     fVideo.GUISet
 fVideo.LossShowStr       fVideo.Play   fVideo.TVAdjust       fVideo.Tour
 fVideo.VoColorAdjust
 --------------------------------Verify Map members------------------------------
 AVEnc.CombineEncodeAVEnc.CombineEncodeParam      AVEnc.Encode  AVEnc.VideoColor
 AVEnc.VideoWidget  Alarm.LocalAlarm    Alarm.NetAbortAlarm.NetIPConflict
 Alarm.PTZAlarmProtocolDetect.BlindDetect Detect.LossDetectDetect.MotionDetect
 General.AutoMaintain   General.General  General.LocationNetWork.DigManagerShow
 NetWork.NetCommon   NetWork.NetDDNS   NetWork.NetDHCP    NetWork.NetDNS
 NetWork.NetEmailNetWork.NetIPFilter NetWork.NetMobile    NetWork.NetNTP
 NetWork.NetPPPoE      NetWork.RTSPNetWork.RemoteDevice            Record
 Storage.SnapshotStorage.StorageFailureStorage.StorageLowSpaceStorage.StorageNotExist
 Uart.Comm          Uart.PTZ    Uart.PTZPreset      Uart.PTZTour
 fVideo.AudioInFormat     fVideo.GUISetfVideo.LossShowStr       fVideo.Play
 fVideo.TVAdjust       fVideo.Tour   fVideo.VideoOutfVideo.VideoOutPriority
 fVideo.VoColorAdjust
 --------------------------------Valid Map members------------------------------
 AVEnc.CombineEncode      AVEnc.Encode  AVEnc.VideoColor AVEnc.VideoWidget
 AVEnc.WaterMarkAbility.DeviceDescAbility.EncodePowerAbility.GUIThemeList
 Ability.SerialNoAbility.SupportVstdAbility.VGAResolution  Alarm.LocalAlarm
 Alarm.NetAbort    Alarm.NetAlarmAlarm.NetIPConflictDetect.BlindDetect
 Detect.LossDetectDetect.MotionDetectGeneral.AutoMaintain   General.General
 General.LocationGeneral.SupportLangGeneral.SystemState             Guide
 Media.DecodeParamNetWork.AlarmServerNetWork.DigManagerShowNetWork.LocalSdkPlatform
 NetWork.Nat     NetWork.Net3G   NetWork.NetARSP NetWork.NetCommon
 NetWork.NetDDNS    NetWork.NetDNS  NetWork.NetEmail    NetWork.NetFTP
 NetWork.NetIPFilterNetWork.NetKeyboard NetWork.NetMobile    NetWork.NetNTP
 NetWork.Pos      NetWork.RTSP      NetWork.Upnp      NetWork.Wifi
 Produce.Test            Record  Storage.SnapshotStorage.StorageFailure
 Storage.StorageLowSpaceStorage.StorageNotExistStorage.StoragePosition         Uart.Comm
 Uart.PTZ      Uart.PTZTour        Uart.RS485      VideoChannel
 fVideo.GUISetfVideo.LossShowStr       fVideo.Play   fVideo.TVAdjust
 fVideo.Tour   fVideo.VideoOutfVideo.VideoOutPriorityfVideo.VoColorAdjust
 fVideo.Volume
 serkov$ DHCP: DhcpGetSecDNS DHCP_DNS_SERVER failed!
 DHCP: ulLease: 60, ulRenewTime: 0, ulReBindTime: 0
 DHCP: DhcpAddLease OK
 cfg -a
 --------------------------------All Config members------------------------------
 AVEnc            Ability              Alarm             Detect
 General              Guide              Media            NetWork
 Produce             Record            Storage               Uart
 VideoChannel             fVideo
--------------------------------Default Config members------------------------------
 AVEnc            Ability
 Alarm                Car             Detect            General
 Guide              Media            NetPlat            NetWork
 Produce  ProfessionNvrMode             Record            Storage
 Uart       VideoChannel             fVideo
--------------------------------Custom Config members------------------------------
 AVEnc
 Ability              Alarm                Car             Detect
 General              Guide              Media            NetPlat
 NetWork            Produce  ProfessionNvrMode             Record
 Storage               Uart       VideoChannel             fVideo
serkov$

—————
Щас воткнул диск который шел в комплекте. В инструкции на диске есть описание пути куда цепляться что бы картинку играть через VLC. Но при этом для того что бы в файрфоксе все работало они предлагают установить IE-tabs аддон. Хотя у меня в линуксе все заработало из коробки благодаря totem

С облаками тоже все не ясно. Инструкция на диске советует http://113.98.254.150:8080/

Инструкция на вкладыше советует http://xmeye.net

Документ про upgrade tool рассказывает что можно удаленно… обновить логотип выводимый на экран при включении. Про обновление прошивки – ни слова.

Кто что интересного высмотрел в логах – ткните пальцем, хочу повышать свою квалификацию)

Share

10 комментариев

  1. Ну так это регистратор от крупного OEM производителя http://jianle.hk/en/Photo_list.asp у них свое облако http://xmeye.net/ к нему регистратор подключается, и не имея внешнего IP к нему можно обращаться по уникальному идентификатору (в меню можно его посмотреть где инфа о прошивке и т.п.) ну а суперпассворд – это чтоб китайцам можно было смотреть что у нас в России происходит 🙂 У нас полстраны эти регистраторы под своим именем продают…

  2. Ну так это регистратор от крупного OEM производителя http://jianle.hk/en/Photo_list.asp у них свое облако http://xmeye.net/ к нему регистратор подключается, и не имея внешнего IP к нему можно обращаться по уникальному идентификатору (в меню можно его посмотреть где инфа о прошивке и т.п.) ну а суперпассворд — это чтоб китайцам можно было смотреть что у нас в России происходит 🙂 У нас полстраны эти регистраторы под своим именем продают…

  3. Купил такой. Пашет как трактор. Сеть через их сайт Xmnet/ только не могу настройки найти чтоб фотки приходили на телефон. Может кто поможет

  4. Алло

    Удалось ли вам выяснить Telnet Логин & Пароль Пожалуйста?

    Я stuggled с данным устройством, как бы я хотел изменить начальный экран изображений на LoadUp.

    спасибо

    С наилучшими пожеланиями

    Харви

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *

Post comment